If you encounter the problem that the Tini’s dual propeller does not work, don’t worry — it may be because the machine is not networked.
NETWORKING AND STARTUP INSTRUCTIONS FOR THE Tini DUAL-PROPELLER #
Step 1. Assemble the dual-propeller handle mount and choose any control handle for assembly.
Step 2. Confirm that both drive systems are switched off.
Step 3. Toggle the switches of both drive systems for 6 seconds, until the indicators on both bodies flash green. Both drive systems enter the networking state.
Step 4. Press the left button of the control handle for 3 seconds, until both handle indicators are steady green.
Step 5. Press the right button of the control handle for 3 seconds, until the right handle indicator flashes green. The control handle enters the networking state.
Step 6. Both indicators of both drive systems turn steady green and stop flashing. Networking successful.
TIPS: #
* After performing the networking operation above, the Tini can be used directly each time, without needing to be networked again.
* If the dual-propeller mode needs to be disassembled and used separately: once the unused control handle is networked with the drive system, it is ready.
* Before use, please fully charge the lithium-polymer battery and the control handle.
For more information, please contact Sublue’s official customer service at support@sublue.com for assistance.
